I recently bought some circular needles, however they are hard to knit with because the wire wants to curl up into a couple of little circles instead of just one circle. I am wondering if anyone knows how to fix this problem and get the needles to stay in one circle. Thank you for your help.
I have some Crystal Palace ones that did that and the man at the LYS said to pull them across the steam as it comes out of your kettle ... the Susan Bates ones come out good but there is no hope for the Boye needles ... I just got a set of Addis but haven't used them yet .. I have boiled my kettle and held the cord in there for a few seconds and out again, pulled on them and if not to your liking, repeat it.
Don't give up on them completely. Sticking them in hot water then letting them cool straight will help. Using them with large projects will too. It just takes time and they won't be absolutely straight, but won't coil up on you.
I've never had a problem straightening circular needles, even Boye's.
I bring a pot of water to a full rolling boil. When it's ready, I turn on the cold water faucet. While holding the needle tips, I dunk the cable into the water for a few seconds, making sure it gets good and hot. Then I hold the tips apart to straighten the cable and run it under the cold water to cool it rapidly while holding it straight. Every cable as come out straight or nearly straight for me. HTH!
gets good and hot. Then I hold the tips apart to straighten the cable and run it under the cold water to cool it rapidly
Once again I'm amazed at how clever you'se guys are sometimes. I used hot water, then I tried to stand around like a clove on a ham waiting for them to cool. Wish I'd thought of the cold water idea. I'm going to boil my Boyes just to see if I can get it to work.
Word of caution...heat only the cable. If using boiling water, don't dunk the joint of needle and cable. This topic has been addressed numerous times on all knitting-related boards so you may run across more ideas in other threads but another suggestion, and one I do, is to heat the cable with blow dryer. If doing this solo, hold one needle between your knees, the other in hand while running dryer up and down length of cable. You'll literally see it relax. Then just hold straight for the few secs it takes to cool. Don't store coiled as it'll resume its old form.