Reply
 
Thread Tools Display Modes
Old 12-05-2012, 09:50 AM   #1
KnitBeg
1st Leg of the Journey
 
KnitBeg's Avatar
 
Join Date: Sep 2012
Location: Netherlands
Posts: 194
Thanks: 223
Thanked 44 Times in 42 Posts
WIP - Albem Bag
As posted in the pattern thread, I started with this Albem Calbed Bag. It is not ready yet, but it has to be ready this Saturday as it is a gift and that evening will be the deadline.
It is the first time in a while that I'm following a pattern. That is, a pattern which can be followed to the letter without much thinking of my own. It turns out, I am quite good at not thinking beforehand - but I make up with the thinking during the knitting. I hope this makes sense

Take the yarn. The pattern clearly states:
BERROCO ULTRA ALPACA (100 grs), #6285 Oceanic Mix
So I went to the store. I knew I should be looking for 100yrs yarn, but I liked the colour of the 40grs better - so I figured I could just use 2 strands to knit. The shopping lady did warn me that this would probably not work. For example, the needle size of the 40grs is given to be 2.5 and you can not just take size 5.0 when you use two strands. The rule of thumb is times 1.5 - so size 4 it is. And the pattern gives size 10 (6mm). That is way thicker But I was set on the colour and left the store with 8 balls of wool (160m each).
Then, and only then I read the description a bit better and realized that the original description already used 2 strands Whoops... typical...
I decided to just make a gauge as I had taken the wool home with me anyway. I looked at my needles and could not find a 4 or a 5, so 4.5 it was. The number 6 looked way too thick and I figured I should use 3 strands for that thickness - not something I looked forward to. So I tried the cable pattern

CB4: Sl 2 sts to cn and hold in BACK, k2, then k2 from cn
(Multiple of 10 sts + 4)
Row 1 (RS): K1, * k2, p2, k4, p2, rep from * across, end k3.
Row 2: K1, k the k sts and p the p sts as they face you to last st, end k1.
Row 3: K1, * k2, p2, CB4, p2, rep from * across, end k3.
Row 4: Rep Row 2.


I was surprised by the description "k the k sts and p the p sts as they face you", but I figured it out due to the picture. It wasn't untill 2 days agoo that I realised that I could have understood it immediately had I read this thread.
This cabled gauge went OK and I found out that 5 cables would give me the width I wanted from the bag. Not quite 8'' (rather 7'') but the bag would serve its purpose. I scanned through the pattern to see whether this would become a problem later on, but did not see anything alarming.
So I started to knit for real - with 5 times the cable pattern, so 10 sts more than the 44 sts the original description said. I also made another adjustment. I realised that the original pattern gives a moss stitch on the sides (st 1 and st 44). I have never put a work together with moss stitches on the sides, always "columns" of purl or knits (see f.ex. the book covers). So I figured it might be easier to just go for the same thing here - instead of the moss stitch on the edges I went for 2 purl stitches.

Here's what I have so far:


What I did so far is:
Cast on 56 stitches
Row 1 (RS): p2, * k2, p2, k4, p2, rep from * across, end k2, p2.
Row 2: k the k sts and p the p sts as they face you
Row 3: p2, * k2, p2, CB4, p2, rep from * across, end k2, p2.
Row 4: Rep Row 2.


When you look carefully, you see that there's a mistake (I think I forgot to knit some stitches) in one of the cable strings (4th swirl upwards, 4th cable towards the right). I decided this will be the back of the bag, as I don't feel like taking it all apart again. It will not be too noticable, I hope


That is it for today - I'll update on my progress tomorrow. I've figured out how to decrease (after some headbreakers), but I do not have time to post more right now.
__________________
It seems so easy...
KnitBeg is offline   Reply With Quote

 

This advertising will not be shown to registered members. Join our free online community today!

Old 12-05-2012, 10:55 AM   #2
nonny2t
Instepping Out
 
Join Date: Feb 2006
Location: Memphis, TN
Posts: 2,785
Thanks: 427
Thanked 855 Times in 815 Posts
It looks good and that is a gorgeous blue. Reminds me of periwinkles!
nonny2t is offline   Reply With Quote
The Following User Says Thank You to nonny2t For This Useful Post:
KnitBeg (12-06-2012)
Old 12-05-2012, 02:02 PM   #3
Jan in CA
Moderator
Mod Squad
 
Jan in CA's Avatar
 
Join Date: Oct 2005
Location: Southern CA
Posts: 37,286
Thanks: 1,677
Thanked 8,781 Times in 7,145 Posts
That's going to be a beautiful bag! I don't think that stitch is a big deal. I just call those little blips a design feature. Good call on not ripping back!
__________________
Jan

When asking questions ALWAYS post the name and a link for the pattern if you have it.

NEW! KH knitting video archive
~HOW TO POST A PHOTO~

Jan in CA is offline   Reply With Quote
The Following User Says Thank You to Jan in CA For This Useful Post:
KnitBeg (12-06-2012)
Old 12-05-2012, 05:59 PM   #4
salmonmac
Moderator
Mod Squad
 
Join Date: Dec 2010
Location: Maryland
Posts: 8,714
Thanks: 645
Thanked 3,465 Times in 3,141 Posts
It's going to be a wonderful bag. The color is divine and the cables look fabulous. Can't wait to see it all together.
salmonmac is online now   Reply With Quote
The Following User Says Thank You to salmonmac For This Useful Post:
KnitBeg (12-06-2012)
Old 12-05-2012, 06:20 PM   #5
GrumpyGramma
2nd Sock, I Rock
 
GrumpyGramma's Avatar
 
Join Date: Jul 2011
Posts: 8,069
Thanks: 2,040
Thanked 3,196 Times in 2,697 Posts

I love the color, I love how you're working with the pattern, your cables are lovely indeed. Just don't point out the mistake to anyone and I expect that nobody will ever notice it but you. We might, but only because you told us exactly where it is.
__________________
~ GG

Happiness is catching that dropped stitch while it's still fixable..

GrumpyGramma is offline   Reply With Quote
The Following User Says Thank You to GrumpyGramma For This Useful Post:
KnitBeg (12-06-2012)
Old 12-06-2012, 06:04 AM   #6
KnitBeg
1st Leg of the Journey
 
KnitBeg's Avatar
 
Join Date: Sep 2012
Location: Netherlands
Posts: 194
Thanks: 223
Thanked 44 Times in 42 Posts
Thank you all for the kind words.

And yes, it is a wonderful colour - but not the same as in the pictures I am really bad at photography - f.ex. I had to make 21 pictures to get the ones above, the other 19 were blurry I really have no clue how to get the right colour... I do wish there was yarn in this colour though, I would buy it in a heartbeat.
The yarn I use is YASMINA (KL 1182) and it is a deep purple colour (deeper than the text coulour) in real life. In the next photo's you might see that, as they were taken on different times during the day and give a different outcome

I took Antaras' advice and made a lifeline before I started to decrease.


A bit blurry, but I hope it shows what I was doing: just sewing the rainbow-yarn through the hoops while knitting along.

Here is the end result:


I really like the roundness in the picture of the Albem Bag on the patter - so I decided not to decrease in one row but over more rows. I tried some different things, as you can see in the Pattern Central thread and had decided on decreasing the 6 outer stitches to 2 by ssk and k2tog. Then 2 rows later (decreasing only on the WS) I decreased again by k3tog or sssk, whichever looked better. I'm not quite sure what I did in the end, but I somehow managed to make it look not too shabby and then I had to bind off while the pattern was screaming for another twist in the cables. So I thought "whatever, I have a lifeline - lets go crazy" and I just continued the pattern and the twists whilst binding off. I had never done that before, but it worked out quite well even if I say so myself:



Of course, I did make some mistakes but I managed to go back and fix those - no need for the lifeline, yet

Yeah... that's what the binding off looked like at some point. I have no clue where my head was at. I guess I was so focussed on getting the twists right that I just forgot to bind off some stitches

So, that is that for the front. Now I just had to do the same for the back - only without the binding off part. And so I did, but then I started thinking... If I would fix the strap to the sides of the front and back, I had to follow the rounds edges. That was the idea: to make the bag a bit round. But this would leave just a small opening, and a narrow one as the sides would be sewn in. I had not thought about that before, but it suddenly struck me. One solution would be to only sew the strap vertically and make special "side straps" to go round the edges - just to cover them up, not to be part of the "bearing strap". Can you follow? But even then the bag opening would be narrow.
So after I had decreased like this on the back, I decided against it and went back to the lifeline situation I was so happy I had the lifeline - it worked like a charm

So I was back to following the pattern for the back-piece, instead of stubbornly insisting on round edges... I do really wonder about the picture that goes with the pattern though... how does it get that round?!?

To be continued
__________________
It seems so easy...
KnitBeg is offline   Reply With Quote
Old 12-06-2012, 08:26 AM   #7
ArtLady1981
Moderator
Mod Squad
 
ArtLady1981's Avatar
 
Join Date: Aug 2006
Location: Kent, Washington
Posts: 10,473
Thanks: 5,264
Thanked 3,893 Times in 3,014 Posts
It's such a beautiful color! The cables and patterning show up sooooo well! Can't wait to see it all complete!
__________________
Knitting Help Video Index

Artlady at Rav
ArtLady1981 is offline   Reply With Quote
The Following User Says Thank You to ArtLady1981 For This Useful Post:
KnitBeg (12-07-2012)
Old 12-07-2012, 05:00 AM   #8
KnitBeg
1st Leg of the Journey
 
KnitBeg's Avatar
 
Join Date: Sep 2012
Location: Netherlands
Posts: 194
Thanks: 223
Thanked 44 Times in 42 Posts
Thank you I can't wait either

So where was I... Ah, back to the pattern for the back:
Knit the next row, decreasing 8 sts across 36 sts. Knit 1 row more.
That seems doable: just knit. But then what happens to the cable pattern? Wouldn't it be nice to continue that pattern for a bit - like the front piece, where I also decreased while keeping the pattern? And so I did something different than the descriptions said - again.
I need to decrease 10 stitches in a pattern with 5 cables, 6 knitted columns and 12 purled columns. I already played a bit with this in my tries, so I knew it would be least visible in the purls. Leaving the outmost purled columns alone, there would be exactly 10x2 purls to be decreased to 10x1 Wonderful when the math is this easy
So for the back piece I followed the pattern for 3 more rows, as the front piece went on for 4, and decreased the purls in the 4th (where the front piece was bound off). This worked like a charm.

Now I had to go on to the flap. But I couldn't just knit a row now, I had to figure out a way to neatly transition. For this would happen if I did not:

It is not a very clear photo ( sorry), but what I try to show is how it looks now I've knitted the purls next to the knitted columns into a knit. I hope that makes sense You still see a purl here, because this was done before I decided the back should be decreased differently (so this one was still with decreases on the edges).

I thought a bit, and then I just had to use the cable-technique to branch the purled columns outward. And so I did:


Now one "knit the knits" row back and I could start with the flap-pattern. I couldn't follow this to the letter either, as I had 46 stitches to start with, instead of 36 - but I already fixed this in the "try outs". The pattern has a repeat of 8 stitches and I added a stitch to either border. So the knitting of the flap went quite smoothly

So, this is what I got:


But then I tried to "flip the flap" to see how it would look:

I think that is a bit short. I like bags where the flap stays put even without the button... It needs some more overlap... But that is something to do when I have the time. Right now the clock is ticking and I still need to make a strap.

To be continued
__________________
It seems so easy...
KnitBeg is offline   Reply With Quote
Old 12-07-2012, 01:28 PM   #9
KnitBeg
1st Leg of the Journey
 
KnitBeg's Avatar
 
Join Date: Sep 2012
Location: Netherlands
Posts: 194
Thanks: 223
Thanked 44 Times in 42 Posts
For the strap, the pattern says:
With smaller straight needles, using 2 strands of yarn held tog, cast on 9 sts.
Row 1 (RS): K1, * p1, k1, rep from * across.
Row 2: P1, * k1, p1, rep from * across. Rep these 2 rows until piece measures 50, end on WS.
Bind off in ribbing.


I read this quite fast and thought "oh, that's easy - that is the moss stitch: alternate a purl and a knit. That is probably because the edge of the front and back piece have a moss stitch, and this way it will be easier to sew them together. But I have a purl on the edges, so maybe I should also have a purl on the edges of my strap...."
Plus, 9 stitches is a bit small so lets make that 11 - I'm gonna make the flap a bit longer anyway.

So I put on 11 stitches and started knitting a moss stitch with purl-columns on the edges. After 5 rows I looked again at the description and realized something was wrong. If it had been moss stitch, they could just tell me to do the same row over and over and over and ... It isn't moss stitch, it is a 1x1 ribbing - a rib stitch! That makes much more sense...
So I took it all apart again and started anew.


It took me quite a while to get it this long

The pattern says the strap should be 50'', so I placed a pin at every 10'' and just waited till I could put in the 5th pin

I think 50'' will be enough, since the bag is a bit smaller than the pattern describes so the strap might be a bit longer. And longer is good But to be honest, I have no clue how long the original is - you can't really see on the picture where the bag will hang on the body... I hope it is around the hips... We'll see.

This is what I have now:


Next will be the elongination of the flap
To be continued
__________________
It seems so easy...
KnitBeg is offline   Reply With Quote
Old 12-10-2012, 06:40 AM   #10
KnitBeg
1st Leg of the Journey
 
KnitBeg's Avatar
 
Join Date: Sep 2012
Location: Netherlands
Posts: 194
Thanks: 223
Thanked 44 Times in 42 Posts
The elongination was just a continuation of the pattern. I can not exactly recall what went differently where, but I think I could do it again - Not really by looking at the pattern, but rather by looking at the cables and what to do to make them go in a certain direction I feel very experienced now :rotfl:



It is one inch longer now:


And that's it - time to sew it all together...
To be continued

BTW It is well past the due date now (and not quite finished ). I have given the present on Saturday night - just the knitting and sewing together was done - accompanied with a poem (as is the custom) about how I wanted to confer with the recipient about certain details of the bag . She pretended to fall for it, but of course my sister knows that I just missed my deadline. She made hers, I got the cutest hat .

However, I am not so far in this thread yet, as I want to make a record of all that I've done - so anybody else who makes this bag will know what to watch out for. I hope...
And I still think the picture is deceiving
__________________
It seems so easy...
KnitBeg is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Albem Bag (pattern + help) KnitBeg Pattern Central 6 11-28-2012 08:59 AM

All times are GMT -4. The time now is 10:01 AM.