Reply
 
Thread Tools Display Modes
Old 11-22-2011, 01:43 PM   #1
knittingneophyte
Casting On
 
Join Date: Nov 2011
Posts: 5
Thanks: 1
Thanked 0 Times in 0 Posts
Trouble with "divide for neck" instructions
Hi,

This is my first time posting here, hope some kind soul will help me get over the "snag" I have encountered while attempting to make a sweater for my unborn child (I'm six months pregnant!)

The free Lion Brand pattern from lionbrand.com is called Sideways Yoke Cardigan, pattern #L0071. I would have posted the link but apparently true neophytes are not allowed to...

Everything was going well until I reached the "Divide for neck" section. Here are the instructions I don't understand:

"join a 2nd ball of yarn and k18. Knit both sets of 18 sts at the same time using separate strands of yarn until piece measures about 2 1/2 in. (6.5 cm) from beg of neck divide.
Next Row: K18 (for right front yoke), slip 18 sts to a holder (for back yoke); leave yarn attached to back yoke for later use."

I joined the 2nd ball of yarn no problem and then proceeded to knit the stitches that were already on the needle with the additional yarn just added on. I did this for 2 1/2 in., thinking I was on track, but the piece already started to look strange.

First of all, this was the "divide for neck" section so I expected the piece to start showing some kind of hole for the neck. Secondly, it didn't make sense to me that this 2 1/2 in.piece was now twice as thick as the rest of the sweater. Third, when I got to the next instruction, (i.e. "Next Row: K18 (for right front yoke), slip 18 sts to a holder (for back yoke); leave yarn attached to back yoke for later use.") I knew something was wrong because the stitches I slipped to the holder for the back did not have any yarn attached to them as the pattern said they should.

What am I doing wrong?
Any help would be greatly appreciated!

Barbara
knittingneophyte is offline   Reply With Quote

 

This advertising will not be shown to registered members. Join our free online community today!

Old 11-22-2011, 01:49 PM   #2
DogCatMom
Knitting the Flap
 
Join Date: May 2011
Location: S.F. Bay Area
Posts: 398
Thanks: 87
Thanked 158 Times in 124 Posts
I can't give you advice on the pattern, but will say that after (I think?) two posts, you'll be able to post the link. What yarn/needle size are you using? Is this your first garment?

Best wishes.

DCM
DogCatMom is offline   Reply With Quote
Old 11-22-2011, 02:37 PM   #3
knittingneophyte
Casting On
 
Join Date: Nov 2011
Posts: 5
Thanks: 1
Thanked 0 Times in 0 Posts
Hi DCM,

Thanks for the info...

I'm using 5 1/2 straight needles (US 9) and Grignasco Flavia Baby yarn (50g or 1.76 oz to 200m or 218 yds).

And yes, this is my first garment, with sleeves anyway. I've made a couple of ponchos successfully
knittingneophyte is offline   Reply With Quote
Old 11-22-2011, 02:55 PM   #4
knittingneophyte
Casting On
 
Join Date: Nov 2011
Posts: 5
Thanks: 1
Thanked 0 Times in 0 Posts
Oh! here's the link!
http://www.lionbrand.com/patterns/L0071.html?noImages=0
knittingneophyte is offline   Reply With Quote
Old 11-22-2011, 05:02 PM   #5
salmonmac
Moderator
Mod Squad
 
Join Date: Dec 2010
Location: Maryland
Posts: 8,839
Thanks: 658
Thanked 3,501 Times in 3,176 Posts
When the pattern says to knit 18sts and then join another ball of yarn and knit the next 18sts it means that you'll be knitting two separate pieces at the same time, each with its own ball of yarn, each with a single strand of yarn.
So to do this, knit 18sts with the yarn you have been using all along, drop that strand of yarn and forget it for the moment. Pick up a new end of yarn and knit the next 18sts. Turn to do the next row and you'll see that you have the working strand of yarn right there at the end of the needle and you also have another strand hanging off the piece halfway down the needle. Pick up your working yarn and knit 18sts up to that hanging strand of yarn, drop the working yarn, pick up the hanging strand to knit the next 18sts. As you continue in this way to knit the rows, you'll see that a slit is forming where you drop one strand and pick up the other.
salmonmac is online now   Reply With Quote
The Following User Says Thank You to salmonmac For This Useful Post:
knittingneophyte (11-23-2011)
Old 11-23-2011, 02:54 AM   #6
knittingneophyte
Casting On
 
Join Date: Nov 2011
Posts: 5
Thanks: 1
Thanked 0 Times in 0 Posts
Thanks salmonmac, your explanation seems clear! I'll give it a shot and post back soon.
knittingneophyte is offline   Reply With Quote
Old 11-23-2011, 12:55 PM   #7
LetsMakeCupcakes
Casting On
 
Join Date: Sep 2011
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
I've been wondering about this too - I'm not used to adding new strands of yarn unless it's at the end of a ball. What's the best way to add new yarn here? Thanks (good luck with your garment!)
LetsMakeCupcakes is offline   Reply With Quote
Old 11-23-2011, 02:12 PM   #8
knittingneophyte
Casting On
 
Join Date: Nov 2011
Posts: 5
Thanks: 1
Thanked 0 Times in 0 Posts
Salmonmac, it's working!!!
This is fantastic. This forum saved my life (or at least my project)
Thanks again!!!
knittingneophyte is offline   Reply With Quote
Old 11-23-2011, 04:12 PM   #9
salmonmac
Moderator
Mod Squad
 
Join Date: Dec 2010
Location: Maryland
Posts: 8,839
Thanks: 658
Thanked 3,501 Times in 3,176 Posts
Originally Posted by LetsMakeCupcakes View Post
I've been wondering about this too - I'm not used to adding new strands of yarn unless it's at the end of a ball. What's the best way to add new yarn here? Thanks (good luck with your garment!)
Probably the same method that you use at the end of a row or when you run out of yarn will work here but take a look at the videos under the Free Videos tab at the top of the page, Tips, Joining new yarn. There are some good techniques there that may give you some alternate ideas.
salmonmac is online now   Reply With Quote
Old 11-23-2011, 06:56 PM   #10
suzeeq
Knit On!
 
Join Date: Aug 2006
Location: Montana
Posts: 27,765
Thanks: 160
Thanked 6,451 Times in 6,035 Posts
Send a message via Yahoo to suzeeq
When you join yarn in the middle of a row like this, just leave a tail to weave in later. The first couple stitches may be a little loose, but they won't unravel; just pull on the tail somewhat. You don't really have to attach the yarn to anything.
__________________
sue- knitting heretic

suzeeq is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
"Divide for armholes" ibby13 How-to Questions 4 07-29-2012 10:33 AM
Berroco "Bunny" pattern - help with head instructions Mussycat How-to Questions 3 03-04-2010 07:57 PM
trouble making "an easy peasy hat" jla721 Pattern Central 7 04-22-2009 09:34 PM
Help with "eyelets" instructions - Dawn Brocco pattern red26 How-to Questions 5 08-13-2007 05:55 AM
What does "Divide for back" mean? Ugg How-to Questions 7 04-16-2006 10:23 AM

All times are GMT -4. The time now is 05:24 AM.